BETAFPV Betaflight ELRS Cetus X 2S Brushelss Drone with C04 FPV Camera VTX Module F4 2S 15A Flight Controller 1103 11000KV Motor, Supported 2S Power for Beginners to Fly Faster Further

1. For the beginners, please practice flying drones via sim or betaflight configurator, which can prevent camera from damaged by frequent drops during flight. 2. For how to replace the camera, please refer the video about the product picture in the detail page. 3. The frame and props are visible when the camera's angle is 0°. Adjust it to about 25°, then the frame and props are invisible when flying. 4. This drone is ELRS flight controller version, please pre-check that the protocol version of all devices connect with this drone is the same one, like the transmitter, TX module, etc, so that they can bind together. 5. Please DO NOT change the ESC or Motor settings on the Betaflight configurator, BLHeli Configurator, or Bluejay Configurator, otherwise, the FC will be invalid. 6. Only ELRS 2.4G version supports motor direction set through Betaflight Configurator and SPI Frsky version does not support it. BLHeli Configurator and Bluejay Configurator are invalid for the BB51 ESC (both versions). 7. Cetus X Brushless Quadcopter should work with two 1S batteries. Do not recommend using different brand batteries. 8. The frame and props are visible when the camera's angle is 0°. Adjust it to about 25°, then the frame and props are invisible when flying. Specification Item: Cetus X Brushless Quadcopter Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC V2.2 (ELRS 2.4G) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G VTX: M04 25-400mW VTX Battery: 2*BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Package 1 * Cetus X Brushless Quadcopter 1 * BT2.0 Battery Charger and Voltage Tester 2 * BT2.0 450mAh 1S 30C Battery 1 * Phillips Screwdriver 1 * Prop Removal Tool 1 * Type-C Adapter 4 * Gemfan 2020 4-Blades Props

• 【Protocol & Firmware】The firmware version of this Cetus X brushless drone is ELRS V3, please make sure all devices connected with this drone use the same protocol and firmware version so that they can bind successfully
• 【Camera & VTX Module】Cetus X Brushless Quadcopter comes with the C04 FPV Camera VTX Module, please note that this is a Betaflight FC version, and can only install the C04 camera. The Cetus FC version is not compatible with the C04 camera. The camera is just plugged and play, and supports 0°-40° adjustable degrees, please do not adjust the degrees to exceed 40°, otherwise, the camera will break and lose the connection signal and image
• 【Betaflight Supported】Flying a drone expertly is the first step to being a drone master and the next is to set up. With the support of Betaflight configurator, beginners are able to learn flight controller settings, which is an essential way to get drone experience. But please note that DO NOT change the ESC or Motor settings on the Betaflight configurator, BLHeli Configurator, or Bluejay Configurator, otherwise, the FC will be invalid.Beginners can use Betaflight Configurator to practice flying drones, which can also prevent the camera from being damaged by frequent drops during flight
• 【Performance】Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor
• 【Design】Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots