Farwest Paint Non-Skid Deck Coating, Quart
$21.50
Price when purchased online
Free shipping
Free 30-day returns
Sold and shipped by lesbaroudeurs.telecomnancy.net
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here.
$21.50
Price when purchased online
Free shipping
Free 30-day returns
Sold and shipped by lesbaroudeurs.telecomnancy.net
Free 30-day returns Details
Product details
| Management number | 204564138 | Release Date | 2025/10/30 | List Price | $12.90 | Model Number | 204564138 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Farwest Paint Non-Skid Deck Coating
A non-slip, non-skid acrylic aggregate coating suitable for steel, aluminum, masonry or wood surfaces. It contains a special aggregate combination which withstands rough weather conditions and daily wear and tear.
PRODUCT TYPE: Pigmented waterborne acrylic latex polymer.
Intended Use: For use on wood, steel, aluminum or concrete masonry surfaces: Decks, porches, walkways, ramps, steps, boat decks, bridgeways and numerous other industrial applications.
VISCOSITY: 125 k.u.
DRY TO TOUCH: 1 hour
WEIGHT SOLIDS: 64-66%
TACK FREE: 2 hours
VOLUME SOLIDS: 45-47%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 13 lbs. per gal.
DRY HARD: 24 hours
V.O.C.: 37 grams per liter
COLOR RANGE: unlimited range of colors
PRACTICAL COVERAGE: 100 square feet per gallon.
SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, corrosion and any existing paint that lacks good adhesion. Temperature must be a minimum of 50? F. to apply Deck-Safe.
Steel & Aluminum: Any bare metal should be primed with Farwest AquaShield Red Oxide Primer or Farwest Rynolite Primer according to label directions. Any new aluminum surface should be first etched with Farwest #695 Rynolite Chemical Cleaner-Etcher. Cement & Masonry Surfaces: New concrete surfaces should age for at least 30 days prior to application of Deck Safe.
Wood: For previously painted wood, remove any loose or peeling paint. For glossy surfaces, prepare the surface by applying Farwest #644 Gloss Set (Liquid Sandpaper) to dull finish prior to application of Deck-Safe.
For New Wood: Ensure that the wood is clean and free of all foreign matter, then simply apply Deck-Safe to the substrate.
APPLICATION: Stir Deck-Safe thoroughly before applying. Apply by brush or roller at a spreading rate of 100 square feet per gallon. Allow the surface at least 24 hours before walking on or for recoating.
THINNING: Thinning is not recommended. If absolutely necessary use regular tap water.
CLEAN-UP: Equipment and tools may be cleaned with regular tap water. If clean-up is delayed, clean with Farwest #610 Lacquer Thinner.
A non-slip, non-skid acrylic aggregate coating suitable for steel, aluminum, masonry or wood surfaces. It contains a special aggregate combination which withstands rough weather conditions and daily wear and tear.
PRODUCT TYPE: Pigmented waterborne acrylic latex polymer.
Intended Use: For use on wood, steel, aluminum or concrete masonry surfaces: Decks, porches, walkways, ramps, steps, boat decks, bridgeways and numerous other industrial applications.
VISCOSITY: 125 k.u.
DRY TO TOUCH: 1 hour
WEIGHT SOLIDS: 64-66%
TACK FREE: 2 hours
VOLUME SOLIDS: 45-47%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 13 lbs. per gal.
DRY HARD: 24 hours
V.O.C.: 37 grams per liter
COLOR RANGE: unlimited range of colors
PRACTICAL COVERAGE: 100 square feet per gallon.
SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, corrosion and any existing paint that lacks good adhesion. Temperature must be a minimum of 50? F. to apply Deck-Safe.
Steel & Aluminum: Any bare metal should be primed with Farwest AquaShield Red Oxide Primer or Farwest Rynolite Primer according to label directions. Any new aluminum surface should be first etched with Farwest #695 Rynolite Chemical Cleaner-Etcher. Cement & Masonry Surfaces: New concrete surfaces should age for at least 30 days prior to application of Deck Safe.
Wood: For previously painted wood, remove any loose or peeling paint. For glossy surfaces, prepare the surface by applying Farwest #644 Gloss Set (Liquid Sandpaper) to dull finish prior to application of Deck-Safe.
For New Wood: Ensure that the wood is clean and free of all foreign matter, then simply apply Deck-Safe to the substrate.
APPLICATION: Stir Deck-Safe thoroughly before applying. Apply by brush or roller at a spreading rate of 100 square feet per gallon. Allow the surface at least 24 hours before walking on or for recoating.
THINNING: Thinning is not recommended. If absolutely necessary use regular tap water.
CLEAN-UP: Equipment and tools may be cleaned with regular tap water. If clean-up is delayed, clean with Farwest #610 Lacquer Thinner.
Bestseller ranking
Accessories & Compressors
Customers who viewed this product also viewed
Marine Paint & Primers
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form